MIG/MAG welder · MAHE
HyperMIG TWIN
Water-cooled MIG/MAG system with two wire feeders for different wires; available with the graphic X or HX control panel.
HyperMIG TWIN by MAHE. VES-TECH Swiss agrees delivery and collection in Switzerland and Liechtenstein for each order. We handle commissioning, maintenance, repairs at the partner workshop in Herisau and warranty claims.
Graphic X control panel
Colour graphic display, four function keys and a central rotary push-button encoder for operating HyperMIG X and HyperMIG TWIN.
Controls and functions in detailClear display
See the program, welding values and active wire feeder.
Direct controls
Select parameters using the function keys and rotary push-button encoder.
99 JOB memories
Save welding settings and recall them for recurring work.
Controls and equipment
Features
- Two wire feeders for different welding wires
- Automatic parameter adjustment by pressing the torch trigger
- Digitally controlled synergic operation
- Spatter-free arc
- HyperPuls, HyperSpeedPuls
- HyperCold and HyperForce
- MMA and gouging
- Remote control (Up/Down torch trigger)
- 4-roll drive
- 5-metre supply cable
- Interconnecting cable assemblies up to 20 metres
- Temperature-controlled fans
- Automatic water pump on/off
- High-performance water cooling
- Environmentally friendly design, 100% recyclable.
Control panel
X: Graphic control panel
Features
- MIS welding
- Pulse welding
- Double-pulse welding
- MIG brazing
- HyperPuls welding
- HyperForce welding
- HyperCold welding
- HyperRoot welding
- HyperUP welding
- MMA stick welding
- TIG Lift Arc and gouging
- 99 programs in JOB mode
Graphic controls in daily use
The graphic X control panel combines a colour graphic display with four function keys and a central rotary push-button encoder. MAHE lists it for HyperMIG X and HyperMIG TWIN. The interface brings together program selection, welding values and JOB management; the labels above the keys indicate their current functions.
- Program and active wire feeder
- The information bar shows the user, wire material, shielding gas and wire diameter, along with the date and time. Where several wire feeders are installed, it identifies the active feeder. This helps check that the program and loaded wire match the job.
- Four MIG settings at a glance
- The upper settings bar contains arc length correction, material thickness in mm, wire speed in m/min and arc dynamics. Turning the encoder changes the selected value; pressing it moves to the next parameter. According to the instructions, arc length correction and material thickness are not available in manual MIG mode.
- Set values, measured values and HOLD
- The main display shows voltage in V and current in A in large figures. Before welding it displays the set values; during welding it shows the current measurements. Afterwards, the last measured values remain visible as HOLD until the panel is operated or a new weld is started.
- Operating modes and preparation
- The operating mode bar selects 2-step, 4-step, spot and interval operation. Manual wire inching and gas testing are also available there. Synergic program selection is based on wire material, wire diameter and shielding gas.
- Processes and fine adjustment
- Process selection includes the MIG/MAG, pulse and Hyper processes available on the specific system, together with MMA, TIG Lift Arc and carbon arc gouging. MENU provides process-dependent parameters such as gas pre-flow and post-flow, starting behaviour and crater filling. Where double pulse is enabled, frequency and amplitude are also available.
- 99 JOB memories for recurring work
- Welding settings can be saved, recalled and edited in 99 internal memory locations. A suitable combination of wire, gas and parameters can then be reused. The instructions explicitly state that the torch operating mode, such as 2-step or 4-step, is not saved in the JOB and must be selected separately.
- Up to eight user profiles
- The instructions describe up to eight users with their own settings. Language selection, date and time, and displays of power-on time and arc time are also provided. Software status and the serial number are available in the corresponding menu.
Specify the equipment precisely: the MAHE product page lists the panel's possible functions; the instructions identify double pulse as an option. Available processes and activations are therefore confirmed in the quotation for the chosen equipment version. Retrofitting an existing EX, SX or HX system requires checking the model, serial number and software version.
Pulse, Hyper and other welding processes explained in detail
Manufacturer documentation: MAHE HyperMIG X · MAHE HyperMIG TWIN · HyperMIG X · PDF · DE · 4.2
HX: Hyper Front Panel
Features
- MIS welding
- Pulse welding
- Double-pulse welding
- MIG brazing
- HyperPuls welding
- HyperForce welding
- HyperCold welding
- HyperRoot welding
- HyperUP welding
- MMA stick welding
- TIG Lift Arc and gouging
- 99 programs in JOB mode
Technical data
Technical data
| Model | 300 | 350 | 400 |
|---|---|---|---|
| Upgrade | max 400A | max 400A | – |
| Mains voltage | 3x400V, 50/60Hz | 3x400V, 50/60Hz | 3x400V, 50/60Hz |
| Mains fuse | 20A | 20A | 20A |
| Open-circuit voltage | 105V | 105V | 105V |
| Effective input current | 19A | 19A | 19A |
| Welding current range | 10 - 300A | 10 - 350A | 10 - 400A |
| Duty cycle at maximum current (40 °C) | – | – | 45% / 400A |
| Current at 60 % duty cycle (40 °C) | – | 350A | 360A |
| Current at 100 % duty cycle (40 °C) | 300A | 300A | 300A |
| Dimensions | 1400x512x864mm | 1400x512x864mm | 1400x512x864mm |
| Weight | 95kg | 95kg | 95kg |
| Degree of protection | IP23 | IP23 | IP23 |
| Conformity marking | CE | CE | CE |
| Safety class | S | S | S |
Models 300, 350 and 400 according to the MAHE table. A dash means MAHE does not publish a value in that cell. Activations, wire/gas equipment and panel are confirmed for the specific system. Manufacturer photograph: HX version; the new graphic X panel is shown separately.
Equipment
Compatible accessories
Interconnecting cable assembly
Interconnecting cable assembly connecting the HyperMIG X power source to the wire feeder.
MF405W
Water-cooled MIG/MAG torch for the HyperMIG X series.
MF240W
Water-cooled MIG/MAG torch for lower power ranges.
Electrode cable 25–90 mm²
Electrode cable for HyperMIG X, EcoMIG, MMS and Delta welding systems.
Work return cable 25–90 mm²
Work return cable for HyperMIG X, EcoMIG, MMS and Delta welding systems.
HyperMIG X wire feed rollers
Wire feed rollers for the HyperMIG X series, with versions for steel and aluminium as well as knurled versions.
